These are the Brakes…Brake it up, Brake it up, Brake it up! (Channeling my Kurtis Blow)

siktl, , ,

Over the weekend I had the pleasure of getting my hands a little dirty and tackling a rear brake and rotor job on the Honda Crosstour.  Very simple job…when everything goes smoothly.  I was able to knock out the driver side in about 25 minutes, taking my time and taking pictures of the process.  The passenger side is an entirely different story full of stripped bolt and screw heads.  Thanks to Autozone for have new caliper bolts and guide pins in stock.

Doing the job myself, I was able to save a ton of money over stealership cost.  Last I checked, they were charging a discounted price of $230 to do the front brakes and resurface the rotors.  I ordered a new brake and rotor kit on Amazon for $100 from R1 Concepts.  The new kit included both front and rear rotors and ceramic brakes.  I only had to pick up some new brake fluid and grease for the calipers and rotors to keep the squealing away.

Now on to the pics:

20170930_104218-1.jpg
R1 Concepts Brake kit
20170930_104250-1.jpg
Ceramic pads
20170930_103708-1.jpg
Caliper and crusty old brake pads
20170930_103509-1.jpg
The caliper removed from the bracket
20170930_103523-1.jpg
Removing the caliper bracket to replace the rotor
20170930_103735-1.jpg
You can see the slight grooves in the old rotor
20170930_103637-1.jpg
Caliper bracket removed.  Placed the bolts in the holes so I don’t lose anything.
20170930_104028-1.jpg
Removing the old rotor which is held on by 2 screws.
20170930_104144-1.jpg
All disassembled and ready for the new parts. Remember to clean up the area prior to installing the new goods.
20170930_104257-1.jpg
Like unwrapping a new present
20170930_104425-1.jpg
Old vs New
20170930_104429-1.jpg
So pretty!!!

20170930_105333-1.jpg

20170930_105045-1.jpg
Do it the right way. Adding the grease to keep the rotor from squealing and rusting together. Added this grease to the guide pins to keep caliper movement smooth.
20170930_105507-1.jpg
New stopping power 🙂

20170930_105518-1.jpg20170930_105511-1.jpg

20170930_105955-1.jpg
Compressing the caliper to fit the new pads
20170930_111148-1.jpg
All shiny and new
20170930_130205-1.jpg
This little booger was one of the screws for the passenger rotor. Had to drill it out and replace it. It took forever and made the job much more difficult, but patience prevailed. Perfect example of having the right tools for the job. Thank you brother-in-law for the gift (Speed out).

All-in-all not a bad day.  Next week…I’ll tackle the fronts.

Remember to like and follow us on Facebook and subscribe to our Perks Garage YouTube Channel

Leave a Reply

Fill in your details below or click an icon to log in:

Gravatar
WordPress.com Logo

You are commenting using your WordPress.com account. ( Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. ( Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. ( Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. ( Log Out /  Change )

w
Cancel

Connecting to %s